Xenum M-Flush Engine Cleaner

 Xenum M-Flush is a highly effective engine cleaner that removes harmful deposits and acids before an oil change. Ensure the performance of your new oil and maximize engine power. Perfect pretreatment before adding ceramic additives like VRX 500.

Before adding new, high-quality oils to your engine, make sure they can operate in a clean environment.

Xenum M-Flush is a professional-grade oil additive designed to clean the engine’s lubrication system efficiently yet safely right before an oil change.

It can be safely used in all petrol and diesel engines. Suitable for cars, motorcycles, boats, trucks, ATVs, and other internal combustion engines.

Why choose Xenum M-Flush?

• Removes deposits and acids: Developed to loosen old deposits and neutralize acids accumulated in the engine. This is particularly important as condensation and short-distance driving tend to acidify the oil.
• Improves new oil performance: When the engine is clean, the new oil retains its properties longer and does not mix with old contaminants.
• Essential before protective treatment: The manufacturer recommends M-Flush treatment especially before using Xenum VRX 500 friction reducer. A clean engine ensures the best possible adhesion and protection for ceramic additives.
• Precise cleaning results: Gently cleans internal engine parts without damaging seals.

Optimize engine performance with M-Flush

In varying weather conditions and cold starts, moisture condenses into the engine oil, accelerating acid formation and sludge buildup.

M-Flush is an excellent solution to "reset" the engine's condition, ensuring that the engine is free from corrosive acids.

Over time, combustion residues, oxidation, and impurities accumulate in the engine oil, weakening lubrication. With M-Flush, you remove these harmful substances so that the new oil can protect your engine optimally from the very first kilometer.

Instructions for use

M-Flush is easy to use and does not require engine disassembly:

1. Add one can (350 ml) to the old engine oil before the oil change. This is sufficient for an oil capacity of approximately 3–6 liters.
2. Run the engine to operating temperature and drive for at least 20 minutes to allow the agent to circulate and clean the entire system. For the best result, drive approximately 50–100 km.
3. Drain the old oil immediately after the treatment.
4. Replace the oil filter and add new engine oil.

Tip: For maximum protection, add Xenum VRX 500 to the new oil immediately after the M-Flush treatment.

Technical Specifications

• Type: Highly detergent concentrate.
• Composition: Solvent-free. Does not contain traditional solvents that could weaken the oil’s lubrication film during cleaning. This allows for a safe and longer cleaning cycle.
• Compatibility: Suitable for all petrol and diesel engines. Compatible with mineral, semi-synthetic, and fully synthetic oils.
• Form: Liquid