LS2 Universal Electric Anti-Fog Lens

With this heated film, you can turn any helmet with a visor into a heated-visor helmet.

The film's heating element helps keep the visor free of fog and ice, even in cold riding conditions.

You no longer need a separate helmet with an electric visor: as a universal product, this film can be fitted to any helmet with a visor, regardless of the manufacturer.

Features

• Heated film for the inside of the visor: helps prevent fogging and icing
• Universal model designed for helmets with a visor
• Runs on 12 V. You can take power directly from the battery or from a USB port
• Wiring harness and installation accessories included. The harness can be connected directly to the battery with M6 terminals or to a USB power adapter.
  • The battery lead has a fuse holder and a 3 A fuse, with a spare fuse included
  • Both ends of the harness have a connector: one for the visor, the other for the battery lead or the USB adapter
  • 2 adhesive cable clips for a neat installation
• The film has 3M tape that bonds permanently to the inside of the visor

Technical details

• Voltage: 12 V
• Model: LS2 heated Pinlock lens (product code LS2-830100EAL01)
• Package includes: wiring harness (black and red wires), USB adapter, cleaning cloth, alignment sticker, installation instructions and installation accessories

Installation tips

We recommend fitting the film to a new or at least scratch-free visor. The film is always installed on the inside of the visor.

1. Leave the visor on the helmet and clean its outer surface. You can place the alignment sticker included in the package on the outside of the visor to make positioning the film easier. The straighter edge of the film and sticker goes at the top.
2. With the alignment sticker in place, put the helmet on and make sure the black edges of the sticker are not directly in your field of view. Move the sticker if needed.
3. Remove the visor and clean its inner surface thoroughly.
4. Stick the heated film to the inside of the visor. Start from one end and use the sticker on the opposite side to align the film. Finally, press the adhesive surface down evenly all over.
5. Remove the alignment sticker from the outside of the visor. Attach the power connector to the outside of the visor, for example at the lower edge with the connector pointing backward.
6. Reinstall the visor on the helmet.

Your heated visor is now ready! Next, connect power to the film either by fitting the wires to the battery or by using the USB cable.

FAQ

Will this fit my helmet?

This is a universal product designed for helmets with a visor. It suits, for example, full-face, modular and adventure helmets. What matters is that the helmet has a visor that covers the face.

Ask us if you are unsure whether it fits your helmet.

What do I need to use the film?

The film runs on 12 V power. The wiring harness and installation accessories are included.

You can connect the wires permanently to the battery terminals with M6 terminals. Both ends of the power lead have a connector, so in use you simply plug the ends together.

A USB-compatible lead is also included, so connecting to the battery is not mandatory. Power is easily available from a USB port.

Which side of the visor does the heated film go on?

Always the inside. The power lead to the film is very thin and fits between the visor and the helmet. An alignment sticker is included to make positioning easier; it is worth placing it on the outside of the visor first to check that the film will sit in a suitable spot.