Xenum ADMAX PRO

Xenum ADMAX PRO is a heavy-duty "one-shot" solution for AdBlue system issues.

It effectively removes crystallization, cleans the SCR catalyst and injectors, and prevents new blockages from forming. Use during maintenance or when the system shows symptoms of malfunction. Ensure system reliability even during freezing weather.

When the AdBlue system begins to act up or you want to ensure its long-term functionality, Xenum ADMAX PRO is the choice. This is an enhanced, more powerful version of the popular ADMAX additive, specifically designed as a "One-shot curative solution" for deep cleaning.

Why choose Xenum ADMAX PRO?

• Repairs and cleans: Designed to remove existing crystallization and dirt from the SCR system. If the AdBlue warning light is on or you suspect a blockage, ADMAX PRO is the primary solution before replacing expensive components.
• Prevents freezing damage: The AdBlue system is under heavy stress in pakkanen conditions. ADMAX PRO prevents fluid crystallization at temperatures below -10 °C, protecting the pump and piping from damage.
• Enhances SCR performance: Accelerates the conversion of urea into ammonia, significantly improving catalyst efficiency and reducing NOx emissions.
• Long-lasting protection: The manufacturer recommends preventive use every 30,000 km to keep the system clean.

When to choose the PRO version?

• In case of problems: When the system has malfunctions or blockages.
• During service: An excellent addition to scheduled maintenance (approx. every 30,000 km) for deep cleaning the system.

ADMAX PRO is developed to solve the most common problems in modern diesel SCR (Selective Catalytic Reduction) systems: urea crystallization and injector fouling. Unlike maintenance additives, the PRO version contains exceptionally powerful cleaning and dissolving agents that remove deposits already formed in the tank, pump, and injectors.

Instructions

The product is a very easy-to-use "one-shot" treatment.

1. Pour the entire contents of the bottle (250 ml) into the AdBlue tank (NOTE: Do not put in the fuel tank!).
2. One bottle treats up to 20 liters of AdBlue liquid.
3. Refill the tank with AdBlue.

You can also pre-mix the additive with AdBlue fluid.

In case of problems: If the SCR system already has a malfunction, it may be necessary to drive the vehicle for at least 50–100 km after adding the product to allow the cleaning reaction to take full effect.

Technical specifications

• Pack size: 250 ml (One-shot bottle)
• Form: Liquid
• Density (20 °C): 1.08 g/cm³ (Significantly denser than standard ADMAX, indicating higher concentration)
• pH value: 9.4
• Flash point: > 100 °C