TSE Parts Ohjaustangon eteenpäinsäädettävä korotuspala

It is important to adjust the ATV's driving position to a comfortable one, especially when driving off-road. A poor driving position makes driving difficult and makes the driver tired.

Here is a solution that will help you forget about these types of worries. Namely, a front and rear adjustable riser! The problem with a traditional riser is the position of the bar, which is always the same, which means that depending on the situation, the riding position suffers.

With a traditional seat riser, you cannot adjust your riding position to suit whether you are sitting or standing.

This riser has four different riding positions that can be quickly adjusted. Just pull the knob and choose the right position for the bar!

The riser is designed so that when the bar is brought as close as possible to the rider, the bar is low. A low and close bar makes for fast road and transition riding.
more comfortable for sitting.

When the bar is moved to the other extreme position, i.e. as far away from the driver as possible, the bar rises up and the driving position becomes natural when riding from a standing position.

With a straight back, your hands can be placed at a comfortable height, and you don't have to hunch your back. With the two adjustment points in between, you can eventually find the right riding position.

Please note when purchasing this that you will most likely also need a crossbar.

The standard bar may be so high that the length of the wires and hoses is not enough with it. The bar thickness can be 22mm, so a normal motocross bar will work here. You can find them in our online store Accessories->Cross bike accessories->Handlebars.

Also note before purchasing that installation may most likely require drilling new holes in the steering column or removing the threads from the old mounting points.

The riser itself has threads, so the bolts are installed from the bottom of the steering column into the riser.

To make installation easier on CFMOTO (excluding CFORCE 850/1000 GEN3), we include longer bolts and bushings in the package to increase the hole spacing to fit the Ceff.

Cables and wires may also need to be rerouted on a case-by-case basis due to the elevation.

We believe that you will also succeed in the installation if we were successful in the Takatalo horn logs :) Don't hesitate to ask for help, we will do our best to help!

You can also buy the riser from us already installed.

If you want the bar to be even higher, you can attach the original bar brackets in the same way as the white-bar GOES in the pictures.

Features:

• Height of the riser: 120 mm
• Longitudinal adjustment distance: 100 mm
• Mounting locations: 32 mm lengthwise and 80 mm widthwise (100 mm with sleeves)
• Four different positions
• Durable aluminum
• Bolts for installation included